Double-Head Wide-Belt sander

Technical Parameters:
Maximum, working width: 600mm
Working thickness: 1mm - 120mm
Speed of front sanding belt 19m / second
Speed of middle sanding belt 19m / second

Speed of after sanding belt 15m/second
Speed of feeding material 5 - 19mm / minute
Size of sanding belt: 1800mm x 610mm
Working air pressure: 0.6Mpa
Gross power of motor 47.07kw
Overall dimension: 2300mm x 1700mm x 1760mm
Net weight: 2800kg
Weight of wooden skeleton case 300kg

Description of using guard:
Electronic pneumatic sanding belt oscillation system
Electronic protection against running off of the sanding belt
Pneumatic sanding belt tension
Automatic brake device on the sanding units
Simple and quick replacement of the sanding pad
Rubbered table rollers
Feed by means of a conveyor belt
Automatic pneumatic conveyor belt tracking
Electromotive height adjustment of the feed table
Electronic digital counter for an 0.1mm accurate adjustment of the feed table
Limit switches for protection of the highest and lowest feed table position
Sensor for automatic adjustment of the workpiece thickness
Pressure switch to indicate the absence of compressed air
Protective finger guard
Emergency stops at the in and out feed side of the machine
Thermal protection against an overload of all motors
Automatic star delta Switch for the sanding belt motor
Ammeter to indicate the load on the sanding belt motor
Thickness protection
Belt breakage protection

Inner packing: excelsior
Outer packing: wooden skeleton case